Making Settings for Slow & Fast Motion Recording (XC10)

Article ID: ART163062 | Date published: 10/15/2015 | Date last updated: 10/15/2015


Making Settings for Slow & Fast Motion Recording (XC10)


This mode allows you to change the shooting frame rate to achieve a slow motion or fast motion effect during playback. Sound is not recorded in this special recording mode.

Configuring Slow & Fast Motion Mode

1. Turn on the camcorder.

2. Set the Movie/Photo switch to [ ].

3. Press the [MENU] button to display the menu screen.

4. Select [ ] Recording Setup menu -> [Slow & Fast Motion].

5. Select the desired slow/fast motion rate.

Select [OFF Normal Recording] to turn off slow & fast motion recording.

6. Touch [ ] or [ ].

Shooting in Slow & Fast Motion Mode

1. Press the START/STOP button to begin recording.

  • Recording will begin at the selected slow/fast motion rate.
  • The slow/fast motion rate appears in the slow & fast motion button (), and The tally lamp illuminates ().

2. Press the START/STOP button again to stop recording.
  • The clip will be recorded and the tally lamp will turn off.

  • Slow & fast motion recording cannot be used together with pre-recording mode.
  • The slow/fast motion rate cannot be changed while recording.
  • [x1/4] and [x1/2] are not available when recording 4K clips.
  • Clips will have a frame rate of 29.97P.
  • In [x1/4] f ace detection & tracking will not be available.
  • Slow & fast motion recording will be deactivated if you change the video configuration.
  • Clips recorded with [x1/4] will have a resolution of 1280x720 and a bit rate of 18 Mbps.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments