Adjusting the Volume

Article ID: ART163084

Date published: 10/15/2015

Date last updated: 10/15/2015

Description

Solution

The machine produces sounds in a variety of situations, such as when fax sending is complete or when a paper jam or error occurs. You can set the volume of each of these sounds individually.

Adjusting <Fax Volume> (MF729Cdw / MF726Cdw / MF628Cw)

1. Press the

(

) key.

2. To change <Fax Volume>, tap

, and tap <Apply>.

You can also adjust the volume by flicking the slider.

Tap and move the cursor all the way to the left to mute the sound.

Adjusting <Other Volume>

1. Press

(

) key.

For MF729Cdw / MF726Cdw / MF628Cw, tap <Other Volume>.

2. Select a setting.

Setting	Description	Procedure
<Ring Tone>*	Sound produced when an incoming fax is received	Go to step 3.
<TX Done Tone>*	Sound produced when fax sending is complete
<RX Done Tone>*	Sound produced when fax receiving is complete
<Scanning Done Tone>*	Sound produced when fax document scanning is complete
<Entry Tone>	Confirmation sound each time a key on the operation panel or button on the display is pressed	Select <On> (produce a tone) or <Off> (not produce a tone).
<Invalid Entry Tone>	Sound produced when an invalid key operation is performed, such as when you enter a number outside the valid setting range
<Restock Supplies Tone>	Sound produced when a toner cartridge is almost empty
<Warning Tone>	Sound produced when a paper jam or other error occurs
<Job Done Tone>	Sound produced when an operation such as copying or scanning is complete
<Energy Saver Alert>	Sound produced when the machine enters or exits sleep mode
<Original in Feeder Detection Tone>	Sound produced when an original is loaded in the feeder