Connecting to an External Monitor to Playback Movies (XC10)

Article ID: ART163116 | Date published: 10/15/2015 | Date last updated: 10/15/2015
 

Description

Connecting to an External Monitor to Playback Movies (XC10)

Solution

The procedure for connecting to an external monitor and playing back still photos and clips you have captured with the camera is explained in the following sections.

Connection Diagram

Connect the video camera with the external monitor.

: HDMI OUT terminal
: HTC-100/S High Speed HDMI Cable (supplied)
NOTE
  • The HDMI OUT terminal is for output only. Do not connect the camcorder to another device’s output terminal using the HDMI OUT terminal as this will cause a malfunction.
  • When using a commercially available HDMI cable, make sure the HDMI cable is Type A to Type C.
  • Audio and video will not be output from the HDMI OUT terminal while Wi-Fi functions are in use.
  • Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors.
  • Video may not be output correctly depending on the monitor.

While the camcorder is turned off, hold the [ ] button () pressed down. The camcorder will turn on and an index screen will appear.

Displaying a Playback Index

1. Hold the [ ] button pressed down.
  • The HD movie index of the SD card is displayed.

  • Press and hold the [ ] button again to set the camcorder to shooting mode.

2. The index screen appears.
2-1.Touch [ ].

2-2. Touch the desired index screen from the list.

  • The index screen you select will be displayed.

4K Movie4K clips recorded on the CFast card
HD MovieHD clips recorded on the SD card.
PhotoPhotos recorded on the SD card.

Playing back Clips

1. Touch a clip.

  • Playback begins.
  • Playback will start from the selected clip until the end of the last clip in the index screen.
  • During playback, you can touch the screen or press the [ ] Button to display the playback controls. You can use the touch panel or joystick to operate the playback controls.

Touch [ ] to stop playback and return to the index screen.

Playing back photos

1. Touch the desired photo.

  • The selected photo will be displayed on the screen.
  • You can drag you finger left/right to browse through the photos one by one. You can also use the joystick to browse through photos.

During playback, you can touch the screen or press the [ ] button to display the playback controls. You can use the touch panel or joystick to operate the playback controls.


SIMS Doc Id

8202602500

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments