To scan with the DR-C225 and using CaptureOnTouch (CoT), follow these steps.
NOTE: Before attempting to scan with the DR-C225, you should always make sure you have the latest driver / version of CaptureOnTouch (CoT) installed. If unsure, please visit our
web site to download the latest versions.
Once the driver and CaptureOnTouch (CoT) have been installed, ensure that the USB cable is plugged in to both the scanner and the computer, power the scanner on, and you can launch the application CaptureOnTouch by clicking on the icon on the task bar.
Windows:
Macintosh:
If the icon is grayed out, or has a red circle with a line through it, it means that the computer is not seeing the scanner. Check all connections, and restart the computer if necessary.
Scanning with CaptureOnTouch (from here on out called CoT) is a 3 step process:
- Select the document
- Select the output
- Click on "Scan".
1. Select the Document
Simply select one of the document types on the screen.
To add a new document, click on the "+",
and you will see this:
If you need to edit the document settings, click on the "pencil" icon located on the bottom right of the button.
2. Select the Output
Select the desired output.
Or, if you want an output that is not already listed, click on the "+ New output" button to create a new output,
and then, click on the "pencil" icon in the lower right corner to modify your output.
Once all of your changes are made, simply click on the "Close" button to save the changes.
3. Click on "Scan" to start the scanning process.
Once the scanning is completed, click on the "Finish" button to save the document.
> Return to the top of this page
