|
The procedure for connecting an external microphone is explained below.
For more information on settings, refer to the Related information.
Attaching the Handle Unit To use the INPUT 1/INPUT 2 terminals,, infrared light, and tally lamp, attach the HDU-1 handle unit to the camcorder.
1. Use the supplied screws to attach the microphone holder unit to the handle unit (  ).
2. (  ) Align the handle unit with the handle attachment unit and then (  ) slide the handle unit forward until it is in place.
- Make sure the front and rear screws are raised when you slide the handle unit.
NOTE
XA30: Make sure to turn the screws and remove the cover before using.
3.  Firmly tighten the front and rear screws with a coin or similar object.
Attach the external microphone 1. Loosen the microphone lock screw ( ), open the microphone holder and insert the microphone ( ).
*1:Microphone lock screw
2. Tighten the lock screw ( ) and put the microphone cable through the microphone cable clamp under the microphone holder ( ).
*2:Terminals INPUT 1/INPUT 2
*3:Cable clamp
3. Plug the microphone cable into the desired INPUT terminal or the MIC terminal (  ).
*4:MIC terminal
|
