Your PIXMA MG3620 can be connected to a wireless LAN by using the WPS Push Button method.  This will allow you to connect your printer to the network by pressing a WPS button on your router.  Please note that not all routers will have this button.  Check your wireless router's documentation to see if such a button is on your router.

Start the WPS setup

1. Press and hold the Wi-Fi button until the POWER lamp flashes.

2. Press the Black Start button then the Wi-Fi button.

3. Make sure the Wi-Fi lamp flashes quickly and the POWER lamp is lit.

4. While the Wi-Fi lamp is flashing quickly, press and hold the WPS button on the wireless router within two minutes per the router manufacturer's recommended time (usually 3-5 seconds).

5. When the connection has been made, the Wi-Fi and ON lamps will be lit.

   

If the connection fails, the Alarm lamp will be lit and the Wi-Fi lamp will flash. If this happens, press the Stop button and try again.

If you still can't connect the printer to your network via the WPS Push Button method, or if your router does not have this button, visit one of the articles below for other wireless setup methods.

Other setup methods

• Windows

• Mac^®

   If you have a USB cable, you can use the Canon IJ Network Tool to reconnect the printer to a wireless network. You can get the IJ Network tool here.

• Wireless Setup on Android™ devices.

• Wireless Setup on iOS^® devices.

If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.

Or if you still need help, visit our Canon Community by clicking the button below to get answers:

____________________________________________________________________________________________