Changing the Number of Recording Pixels (PowerShot ELPH360 HS / IXUS 285 HS)
Article ID: ART164121
|
Date published: 01/05/2016
|
Date last updated: 01/05/2016
Description
Changing the Number of Recording Pixels (PowerShot ELPH360 HS / IXUS 285 HS)
Solution
Solution
Choose the image’s number of recording pixels from 4 levels.
*It may not be possible to change the image resolution depending on the shooting mode. For a list of shooting modes in which the resolution can be changed, please refer to the table at the end of the page.
The procedure for changing the image resolution is explained below.
1. Turn the camera on.
2. Press the [ ] button to display the menu items, and then press the [ ] , [ ] buttons to select [Recording pixels].
NOTE
If the default settings have not been changed, [L] is displayed. If the recording pixels have been changed, the changed setting is displayed.
3. Press the [ ] button to access the setting screen, press the [ ] , [ ] buttons to select the recording pixels, and the press the [ ] button.
The Recording Pixels can be changed in the shooting modes shown in the table below.
] button to display the menu items, and then press the [ 
] , [ 
] buttons to select [Recording pixels].
] button to access the setting screen, press the [ 
