|
You can divide AVCHD scenes in order to leave out the best parts and later cut out the rest.
1. Turn on the camcorder.
2. Press [  ] to set the camcorder to Playback mode.
3. Play back the desired scene.
4. Touch the screen to display the playback controls, and then touch [  ] to pause the playback.
5. Open the screen for dividing scenes.
6. Touch [Divide].
7. Bring the scene to a precise point, if necessary.
- Playback controls will appear on the screen. Use any special playback modes (fast playback, frame reverse/advance) as necessary to locate the desired point.
During playback pause |
/
| Frame reverse/advance* |
During playback |
/
| Fast playback backward/forward |
*When advancing/reversing frames while dividing the scenes, the interval between frames is about 0.5 seconds.
8. Stop playback momentarily at the position you want to divide.
9. Touch [Divide].
10. Touch [Yes].
The video from the division point to the end of the scene will appear as a new scene in the index screen.
NOTE
- If the scene cannot be divided at the point where you paused the playback, advance/reverse a frame and then divide the scene.
- During the playback of a scene that was divided, you may notice some anomalies in the picture/sound at the point where the scene was cut.
The following scenes cannot be divided:
- Video snapshot scenes and other scenes that are too short (less than 3 seconds) cannot be divided.
- Scenes cannot be divided within 1 second from the beginning or the end of the scene.
|
