Dividing Scenes

Article ID: ART164134 | Date published: 01/05/2016 | Date last updated: 01/05/2016


Dividing Scenes


You can divide AVCHD scenes in order to leave out the best parts and later cut out the rest.

1. Turn on the camcorder.

2. Press [ ] to set the camcorder to Playback mode.

3. Play back the desired scene.

4. Touch the screen to display the playback controls, and then touch [ ] to pause the playback.

5. Open the screen for dividing scenes.
  • Touch [Edit]

6. Touch [Divide].

7. Bring the scene to a precise point, if necessary.
  • Playback controls will appear on the screen. Use any special playback modes (fast playback, frame reverse/advance) as necessary to locate the desired point.

 During playback pause  /  Frame reverse/advance*
 During playback  /  Fast playback backward/forward

*When advancing/reversing frames while dividing the scenes, the interval between frames is about 0.5 seconds.

8. Stop playback momentarily at the position you want to divide.

9. Touch [Divide].

10. Touch [Yes].

The video from the division point to the end of the scene will appear as a new scene in the index screen.

  • If the scene cannot be divided at the point where you paused the playback, advance/reverse a frame and then divide the scene.
  • During the playback of a scene that was divided, you may notice some anomalies in the picture/sound at the point where the scene was cut. 
The following scenes cannot be divided:
- Video snapshot scenes and other scenes that are too short (less than 3 seconds) cannot be divided.
- Scenes cannot be divided within 1 second from the beginning or the end of the scene.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments