Saving Recordings on the Optional CS100 Connect Station
Article ID: ART164181 | Date published: 01/05/2016 | Date last updated: 01/17/2017
 

Description

Saving Recordings on the Optional CS100 Connect Station

Solution

You can save all the movies and photos you recorded onto the optional CS100 Connect Station by connecting it to your camcorder with the supplied USB cable. You can also connect the camcorder* and the CS100 via Wi-Fi by simply holding the [NFC mark] on the camcorder close to the NFC connect point on the CS100 to automatically save the recordings.
You can organize your recordings on the CS100 in albums, play them back on a TV, or share them on the Web.
For details, refer to the instruction manual of the CS100.
 
* Only NFC-compatible devices.

Saving Recordings by Connecting the Camcorder to the CS100 using the Supplied USB Cable

1. Power the camcorder using the compact power adapter.

2. Press [ ] to set the camcorder to playback mode.

3. Touch [ ].

4. Swipe the LCD screen left/right to bring [Other Settings] to the center and touch the icon.

5. Touch [ ].

6. Swipe up/down to bring [USB Connection Type] into the bar, and touch the button.

7. Touch [ Connect Station ] or [ Connect and Set ].

8. Touch [ ].

9. Connect the camcorder to the CS100 using the supplied USB cable.

Connect Station CS100 (optional)
USB Terminal
USB Cable IFC-300PCU/S (supplied)

If a device selection screen appears, select [Connect Station].
  • When the connection is correctly established, the transfer of files will start automatically.
  • You can check on the connect station when all the files have been saved.

10. Disconnect the USB cable.
  • The index screen will appear again on the camcorder's screen.

Saving Recordings Wirelessly by Touching the CS100 with the Camcorder (Only NFC-compatible devices)

1. Power the camcorder using the compact power adapter.

2. Press [ ] to set the camcorder to playback mode.

3. With the camcorder turned off or displaying an index screen in playback mode, carefully hold the NFC touchpoint on the camcorder close to the NFC connect point on the connect station.

  • Align the camcorder's [ ] mark with the center of the connect point on the connect station.
  • If there is no reaction, try slightly adjusting the position/angle of the camcorder while carefully holding it close to the connect point on the connect station, or very gently touching the camcorder to the connect station.
  • If the camcorder was turned off, it will turn on in playback mode.
  • The connect station will emit a beep sound. When the Wi-Fi connection is correctly established, the transfer of files will start automatically.
NOTE
Estimated Time Required for Saving to Connect Station CS100
Saving a scene that is about 4 minutes long will take approximately 5 minutes. When saving a large number of files, the operation may take some time.
Connect Station Firmware
Be sure to always use the latest version of the connect station's firmware. Updating the firmware to the latest version may correct known issues and add new functionality to the connect station. For details about updating the firmware, refer to the instruction manual of the CS100.


SIMS Doc Id

8202560100