The camera cannot be connected with a computer / The computer does not recognize the camera (EOS 80D)

 

Description

The camera cannot be connected with a computer / The computer does not recognize the camera (EOS 80D)

Solution

If the camera cannot be connected to a computer, it may be due to the following reasons. Therefore, please check the following items in order to find the cause of the problem.

1. [Wi-Fi/NFC] is set to [Enable]

If [Wi-Fi/NFC] is set to [Enable] under the camera’s [ : Wireless communication settings], the camera cannot connect to a computer. Set [Wi-Fi/NFC] to [Disable], then connect the interface cable.

2. The camera is not connected properly to the computer with the supplied USB cable

To connect the camera to a computer, use the USB cable (IFC-200U / IFC-400PCU / IFC-500U, sold separately).

3. The camera is not recognized by EOS Utility

If the camera is not recognized by the supplied software, please check whether any of the following cases may be a remedy to the problem.
  • The supported software version may differ depending on the camera you use and the operating system installed on the computer.(Version 3.4 or later is supported.)
  • When using a camera or computer that differs from the model used initially, please download the supported version of EOS Utility. Versions of the EOS Utility Updater for a variety of cameras/operating systems can be downloaded from the Canon homepage.
  • EOS Utility does not operate correctly on a computer if its system requirements are not met. Use EOS Utility on a computer with compatible system requirements. For details on system requirements that are compatible with the application, please refer to the Related information.
  • EOS Utility and the camera may not communicate normally with a cable other than the EOS DIGITAL camera-dedicated Canon interface cable. Connect your camera and computer directly with the interface cable. Do not connect the camera via a hub; doing so may prevent EOS Utility and your camera from communicating normally.
  • If there is insufficient charge left in the camera battery, the camera cannot communicate with EOS Utility. In this case, replace the battery with a charged one, or use an AC adapter kit ACK-E6 (Separately available).Your computer does not supply power to the camera through the interface cable.

4. CameraWindow is being used

Your camera does not support CameraWindow. If you are using CameraWindow, please install and use the EOS Utility application supplied with the camera.
NOTE
If your computer does not meet the System Requirements for EOS Utility, you can import images using a card slot on the computer or a commercially available card reader.
For the procedures for importing images using a card reader or a card slot on a computer, please see the Related Information.

5. The camera is not recognized by Windows OS

If the descriptions in items 1 through 4 above do not apply to your situation, the camera may not have been recognized by your computer's OS. For information on how to work around this, please see the Related Information.


The camera is not recognized by the computer (Windows 8) (EOS Utility Ver.3.x) The camera is not recognized by the computer (Windows 7) (EOS Utility Ver.3.x) Using a Card Reader or a Card Slot on a Computer to Download Images System requirements for applications (EOS 80D)

SIMS Doc Id

8202787600

Doc ID   ART164575
Updated   04/18/2016

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments

 

Please Sign In

Username
Password

Did you forget your password?
Click here for assistance