When EOS Utility Ver.3.x is Buggy / How to Uninstall (Delete) and Reinstall from the Included CD-ROM "EOS DIGITAL Solution Disk" (Windows 8)
Article ID: ART164585 | | | Date published: 02/08/2016 | | | Date last updated: 04/21/2016 |
Description
When EOS Utility Ver.3.x is Buggy / How to Uninstall (Delete) and Reinstall from the Included CD-ROM "EOS DIGITAL Solution Disk" (Windows 8)
Solution
Solution |
Use the following procedure to uninstall (delete) and reinstall EOS Utility Ver.3.x.
Uninstalling (Deleting) EOS Utility Ver.3.x 1.ã
![]() ![]() ![]() ![]()
2. When the Control Panel is shown, click [Uninstall a program*].
*If the desktop display is set to [Large Icons] or [Small Icons], click [Programs and Features].
![]()
3. Select
![]() ![]() ![]()
4. The following dialog is displayed.
Click [OK] to start the uninstallation of EOS Utility 3.
![]()
5. If the following figure is shown, click [Ignore].
![]()
6. When uninstallation is complete, the following dialog is displayed.
Click [OK] to close the screen.
![]()
The procedure for uninstalling EOS Utility Ver.3.x is now complete.
Reinstalling EOS Utility Ver.3.x 1. Use the procedure above to uninstall EOS Utility Ver.3.x, and then restart the computer.
2. Before installing, check the label of your [EOS DIGITAL Solution Disk] CD-ROM to confirm that it is version ("Ver.") [31.2] or later.
![]()
3. Insert your [EOS DIGITAL Solution Disk] CD-ROM into the computer.
Click the window displayed on the top right of the screen.
![]()
4. When the following screen is shown, click [Run SETUP.EXE].
![]()
5. Select the area in which you live.
![]()
6. Select the country where you live, and then click [Next].
![]()
7. If a language setting screen appears, select the desired language from the options displayed.
![]()
8. When the following screen is shown, click [Custom Installation].
The window displayed may differ depending on your device model.
![]()
9. If you are prompted to close any other applications, close all currently running applications and then click [OK].
![]()
10. In the [Software to be installed] window, select
![]() ![]() ![]() ![]()
11. When the following screen is displayed, confirm that [EOS Utility 3] is selected and then click [Install].
![]()
12. If you accept the [License Agreement], click [Yes] to install the software.
![]()
13. Installation starts.
![]()
14. When [The software has been successfully installed.] is shown, click [Next].
![]()
15. The following screen is displayed.Select
![]() ![]() To register your camera on CANON iMAGE GATEWAY, click [Yes, I would.].
![]()
16. Click [OK].
![]()
17. Click [Finish].
![]()
The procedure for reinstalling EOS Utility Ver.3.x is now complete.
|
ID: 8202788900_EN_2
|
SIMS Doc Id
8202788900