The effects of [High ISO Speed Noise Reduction] on the number of possible shots for the maximum burst during continuous shooting (EOS REBEL T1i/EOS 500D)
| Article ID: ART165082 |
| |
Date published: 03/31/2016 |
| |
Date last updated: 03/31/2016 |
Description
The effects of [High ISO Speed Noise Reduction] on the number of possible shots for the maximum burst during continuous shooting (EOS REBEL T1i/EOS 500D)
Solution
| Solution |
If the maximum burst is lower than the normal number, and the camera stops continuous shooting in mid-course, check the [High ISO Speed Noise Reduction] for custom function setting.
If [High ISO Speed Noise Reduction] is set to [Strong], the number of continuous shots (maximum burst) will be lower. To reset the maximum burst to normal, select either [Standard], [Low], or [Disable] for [High ISO Speed Noise Reduction].
IMPORTANT
When the [High ISO speed noise reduction] setting is enabled, more time is required to process noise reduction. As a result, it will take longer to temporarily save data in the storage space, and the camera is more likely to be interrupted during continuous shooting.
1. To change the [High ISO speed noise reduction] setting, display the menu screen and choose [Custom Functions(C.Fn)] on the [  ] tab, then press <  >.
2. Select the [High ISO speed noise reduction (Custom Function No.5)]. The [High ISO speed noise reduct'n] screen will appear, Select either [0: Standard], [1: Low], or [3: Disable] for [High ISO speed noise reduction].
For more information, please refer to the camera's instruction manual.
|
|
ID: 8202651400_EN_2
|
