Ask a Question

The Processing/Data Indicator Remains Lighting Up or Blinking

Article ID: ART165280 | Date published: 04/01/2016 | Date last updated: 09/12/2017
 

Description

The Processing/Data Indicator Remains Lighting Up or Blinking

Solution

Issue

The Processing/Data indicator remains Lighting Up or Blinking.
Cause


Summary

The Processing/Data indicator lights when any job is being processed. If the Processing/Data indicator remains lighting up or blinking, and the Error indicator is also blinking with an error message on the display, check the following.
See Also
Cause


Summary

Message Remedy
Paper Size & Settings Mismatch See [
If the Message <Paper Size & Settings Mismatch> Appears ].
No Paper See [
If the Message <No Paper> Appears ].
Paper jammed. See [
If the Message <Paper jammed.> Appears ].
Cartridge has reached end of lifetime. Rplcmt. recommended. See [
When to Replace the Toner Cartridge ].


See Also
Cause


Summary

If no message is displayed on the display, print received documents or delete unnecessary documents in memory.
See Also
Cause


Summary

When the problem is solved, the document is printed and the Processing/Data indicator goes off.
If the indicator still remains lit even after checking the messages above, delete or cancel jobs using .
* You cannot restore jobs once you deleted.
See Also
ID: 8202835600_EN_1

SIMS Doc Id

8202835600

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments