|
You can copy two pages of a document on both sides of the paper. You can also copy a two-sided document on both sides of the paper, or on two separate pages.
IMPORTANT
Make sure that the paper size switch lever is set properly
- When performing 2-sided copying, improper setting of the paper size switch lever can cause misfeeds or paper jams. When performing 2-sided copying, make sure that the paper size switch lever is set properly for the size of the paper to be used. For details, see the "e-Manual" (HTML manual) in the DVD-ROM supplied with the machine.
Make sure that the sub-output tray is closed
- When the sub-output tray is open, you cannot perform 2-sided copying. When performing 2-sided copying, always make sure that the sub-output tray is closed. [ Paper Feeding and Paper Output ]
NOTE
- <2-Sided> may not be available with some sizes and types of paper.
- <2-Sided> is not available when using <ID Card Copy>.
 Types of 2-sided copying
The illustration below shows the types of 2-sided copying.
1-Sided->2-Sided
2-Sided->2-Sided
2-Sided->1-Sided
 <Original/Finishing Type>
Specify if you want to change the binding, such as when copying book-type documents in calendar-type format.
 1-Sided->2-Sided
- If you want to copy portrait-oriented documents in calendar-type format (short-edge binding)
- If you want to copy landscape-oriented documents in book-type format (short-edge binding)
2-Sided->2-Sided
- If you want to create copies with a different binding type than the original
2-Sided->1-Sided
This setting enables you to align the direction of the output paper.
- When a 2-sided document is in portrait-oriented calendar-type format (short-edge binding)
- When a 2-sided document is in landscape-oriented book-type format (short-edge binding)
|
