Cleaning the Inside of the Printer

Article ID: ART165464 | Date published: 04/18/2016 | Date last updated: 04/18/2016


Cleaning the Inside of the Printer


Dirt may adhere to the fixing units inside the machine and cause black spots to appear on printouts. To clean the fixing unit, perform the following procedure. Note that you cannot clean the fixing unit when the machine has documents waiting to be printed. Note that cleaning the fixing unit requires A4 or Letter size paper with a weight of 16 to 32 lb Bond (60 to 120 g/㎡). Set the paper in the multi-purpose tray before performing the following procedure.
  • Cleaning consumes the toner cartridge. Make sure that there is sufficient toner cartridge remaining beforehand.

Fixing Unit

1. Press ().

2. Use / to select <Cleaning>, and press .

3. Select the size of the loaded paper, and press .

4. Select <Yes>, and press .
The <Set cleaning paper and press the Online key.> message appears on the display.

5. Press Press ().
The cleaning paper is slowly fed into the machine and the cleaning of the fixing unit starts.
  • You cannot stop the cleaning halfway. Wait until the cleaning is completed (approx. 165 seconds).



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments