|
The charging procedure and charging time for the battery supplied with your camera are explained below.
Battery Charging Procedure
1. Remove the protective cover.
2. As shown in the illustration, attach the battery securely.
To detach the battery, follow the above procedure in reverse.
3. Recharge the battery.
[LC-E10]
As shown by the arrow, flip out the battery charger's prongs and insert the prongs into a power outlet.
 Full-charge lamp  charge lamp
[LC-E10E]
Connect the power cord to the charger and insert the plug into the power outlet.
4. Recharging starts automatically and the charge lamp turns orange.
5. When the battery is fully recharged, the full-charge lamp will turn green.
CAUTION
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.
Battery Charging Time
- It takes approx. 2 hours to fully recharge a completely exhausted battery at room temperature (23°C / 73°F). The time required to recharge the battery will vary greatly depending on the ambient temperature and the batteryâs remaining capacity.
- For safety reasons, recharging in low temperatures (6°C - 10°C / 43°F - 50°F) will take a longer time (up to 4 hours).
|
