Load Ink and Paper Cassette in the SELPHY CP1200 Printer

Article ID: ART165793 | Date published: 06/14/2016 | Date last updated: 02/18/2020
 

Description

Learn how to load the ink and paper cassette for a SELPHY CP1200.

Solution

Follow the instructions below to load paper in the cassette.

Load paper in the cassette

  1. Check the paper size (P) on the paper cassette (such as Postcard Size or Card Size) to make sure it matches the size of the ink cassette.

  2. There are two layers of covers. Open the outer cover Number One icon, then the inner cover Number 2 icon.

    Image shows outer cover (1) and Inner cover (2) with Paper size (P) identified on top of covers

  3. When you load the paper, make sure to:
    • Load no more than 18 sheets. More sheets may damage the printer or cause malfunction.

    • Hold the paper as shown, and load it with the glossy side up. (Avoid touching the glossy side of the paper as it may affect print quality.)

      Glossy side of paper facing down
    • Remove any protective sheets from the paper, and load only paper into the cassette.

    • For postcard prints where the paper has a space for a stamp, load the paper with the stamp area facing down as shown.

      Stamp area facing down in upper left of cassette

  4. Close the inner cover firmly until it clicks into place. Leave the outer cover open when printing.

    Image shows Inner cover closed and out cover open

    Note To print on postcard paper, remove the adapter as shown.
     

    Image shows adapter (L) being removed to print a postcard

CautionsCautions

  • Always load paper with the glossy side facing up.

  • Avoid the following:
    • ​bending or separating the paper at the perforations before printing.
    • using label paper whose upper label surface is peeling off or has been partially pulled up.
    • writing on paper before printing,
    • reusing paper (for instance, by reinserting previously printed paper).
    • touching the springs on the paper cassette.
    • touching the glossy, printing side of the paper
    • handling the paper with wet hands (dust, dirt or moisture can affect print quality or damage the printer)


Insert the ink and paper cassettes

Follow these steps to insert the ink and paper cassettes.
  1. Open the ink and paper compartment covers.

    Ink and paper compartment covers in open position
  2. Insert the ink cassette into the printer in the direction of the arrow on the cassette until it clicks into place.

  3. Close the ink cassette compartment cover.

    Ink cassette compartment cover closed.
  4. Make sure the outer cover is open, and insert the paper cassette all the way into the compartment.

    Outer cover fully open and paper cassette being pushed into place





Before beginning your printer job, it's good to know a few things.

Good to know

  • To get the best quality prints, we recommend the use of genuine Canon Color Ink/Paper Sets for SELPHY CP printers.

  • Canon Color Ink/Paper Sets for SELPHY ES are not compatible with this printer.

  • You can use Paper Cassette PCPL-CP400 (sold separately) to print on L-size paper.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments