Automatic Gain and ISO Limits (XC15)

Article ID: ART166520 | Date published: 09/12/2016 | Date last updated: 09/20/2016
 

Description

Automatic Gain and ISO Limits (XC15)

Solution

Depending on the brightness of the surroundings, the camcorder will automatically raise the gain or ISO speed to try to get a brighter picture. Because doing so can lead to video noise, you can select a maximum limit for how high levels are raised. These limits are referred to as the automatic gain control (AGC) limit and auto ISO limit. Shooting with a smaller limit is useful as it results in a darker picture but less noise. This function is available when the shooting mode is set to [ Av ] , [ Tv ] or [ P ].

1. Press the [MENU] button.

•[ ] mode, skip to step 5-3.

2. Touch [ : Camera Setup ] -> [ISO / Gain].

3. Select the desired option.

4. Touch [ ].

5. Open the submenu to set the AGC limit or auto ISO limit.

  • 5-1. Selected [ISO]:
Touch [ : Camera Setup ] -> [Auto ISO Limit].

  • 5-2. Selected [Gain]:
Touch [ : Camera Setup ] -> [AGC Limit].

  • 5-3. [ ] mode:
Touch [ : Camera Setup ] -> [Auto ISO Limit].

NOTE
  • Because only the ISO speed can be adjusted for photos, you will be able to set only the auto ISO limit.

6. Touch [ ] or [ ].
 
NOTE
  • The AGC limit or auto ISO limit dial will appear at the bottom of the screen.
  • Touch [A] to remove the limit.

7. Drag your finger left / right along the dial to select the desired value.
 
  • You can also push the joystick up/down until the position of the current value is highlighted in orange and then push left/right to adjust the value.

8. Touch [ ].

9. The AGC limit or auto ISO limit icon will appear on the left side of the screen.
 


SIMS Doc Id

8203080200

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments