Ask a Question

Using the WPS Push Button Method to make the Network Connection - MG3020 / MG3022

Article ID: ART166615 | Date published: 09/20/2016 | Date last updated: 05/22/2019
 

Description

WPS connection

 

Solution

WPS Connection

  1. Make sure the button on the wireless router is ready to be pressed.

  2. Press and hold the Wireless button (A) on the printer until the Wireless lamp (B) flashes.

    figure: Press and hold the Wireless button and the Wireless lamp flashes

  3. Press the Color button (C).

    figure: Press the Color button

  4. Press the Wireless button repeatedly until the Direct lamp (D) lights up.

    figure: Press the Wireless button repeatedly until the Direct lamp lights up

  5. Press the Color button, and make sure that the ON lamp (E) and the Wireless lamp flash, then press and hold the button on the wireless router within 2 minutes.

    figure: Press the Color button
    arrow
    figure: The ON lamp and the Wireless lamp flash

  6. Make sure the Wireless lamp is lit.

    figure: The Wireless lamp is lit

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments