Ask a Question

Loading Documents in the ADF (Auto Document Feeder)

Article ID: ART166671 | Date published: 10/14/2016 | Date last updated: 03/29/2019
 

Description

This article explains how to load documents in the ADF (Auto Document Feeder).

Solution

Note

  • To scan a document at optimum quality, load it on the platen glass.
     

  1. Make sure that any original has been removed from the platen glass.
     

  2. Open the document tray.
     


     

  3. Insert the document in the document tray until you hear a beep sound.

    Load the document WITH THE SIDE TO SCAN FACING UP in the document tray.

  4. Adjust the document guide (A) at the front of the machine to match the width of the document.

    Do not slide the document guide too hard against the document. The document may not be fed properly.
     


 

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments