How to Start Cableless Setup - iP8720

Article ID: ART166929 | Date published: 12/14/2016 | Date last updated: 02/19/2018
 

Description

This article explains how to place your PIXMA iP8720 into cableless setup mode.

 

Solution

To place your printer into cableless setup mode, follow the steps below.

1. Hold down the Wi-Fi button (B) on the printer until the (white) POWER lamp flashes 2 times, then release the Wi-Fi button after the second flash.
 

 

2. Make sure that the (blue) Wi-Fi lamp flashes quickly and the (white) POWER lamp is lit.



The printer is now in cableless setup mode.  Proceed with installing the software on your computer or using Canon PRINT Inkjet / SELPHY to connect the printer to your wireless network.

 

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments