Cleaning the Print Head - TS9020
Article ID: ART167027 | Date published: 12/28/2016 | Date last updated: 04/05/2019
 

Description

This article explains how to clean the print head for your PIXMA TS9020 from its operation panel.

 

Solution

Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary.

You need to prepare: a sheet of A4 or Letter-sized plain paper
 

  1. Make sure that the power is turned on.
     

  2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
    After pushing the cassette back, the paper information registration screen is displayed on the touch screen. Select A4 or Letter for Page size, then select Register.
     


     

    If a message is displayed on the screen, follow the directions in the message to complete registration.
     

     Note

    • Be sure to load paper in the cassette. Even if you load paper in the rear tray, the nozzle check pattern will not be printed.
       
  3. Select Setup on the HOME screen.
    The setup menu screen will appear.
     

  4. Select Maintenance.
    The Maintenance screen will appear.
     

  5. Select Cleaning.
     


     

    The confirmation screen will appear.
     

  6. Select Yes.
    The printer starts cleaning the print head.
    Do not perform any other operations until the printer completes the cleaning of the print head. This takes about 1 minute.
    The pattern print confirmation screen will appear.
     

  7. Select Yes.
    The operation panel is opened and the paper output tray is pulled out automatically.
    The nozzle check pattern will be printed.
     

  8. Examine the nozzle check pattern.


 Note


 

TS9020 Page