Deep Print Head Cleaning - TS9020
Article ID: ART167028 | Date published: 12/28/2016 | Date last updated: 04/29/2019
 

Description

This article explains how to clean the print head deeply in your PIXMA TS9020.  This process uses more ink than the regular print head cleaning process, so use this only when necessary.

 

Solution

If print quality does not improve by the standard cleaning of the print head, clean the print head deeply. Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when necessary.

You need to prepare: a sheet of A4 or Letter-sized plain paper
 

  1. Make sure that the power is turned on.
     

  2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
    After pushing the cassette back, the paper information registration screen is displayed on the touch screen. Select A4 or Letter for Page size, then select Register.



    If a message is displayed on the screen, follow the directions in the message to complete registration.

 Note
  • Be sure to load paper in the cassette. Even if you load paper in the rear tray, the nozzle check pattern is not be printed.
 
  1. Open the operation panel, then pull out the paper output tray.
     

  2. Select Setup on the HOME screen.
    The setup menu screen will appear.

     

  3. Select Maintenance.
    The Maintenance screen will appear.

     

  4. Select Deep cleaning.



     

    The confirmation screen will appear.

  5. Select Yes.
    The printer starts cleaning the print head deeply.
    Do not perform any other operations until the printer completes the deep cleaning of the print head. This takes about 1 to 2 minutes.
    The pattern print confirmation screen will appear.
     

  6. Select Yes.
    The nozzle check pattern will be printed.
     

  7. When the completion message appears, select OK.
     

  8. Examine the nozzle check pattern.


If a particular color is not printed properly, replace the ink tank of that color.

If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours.

If the problem is still not resolved, the print head may be damaged. Service is required.
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account