Paper Jammed in the Paper Output Slot or the Rear Tray - G1200

Article ID: ART167109 | Date published: 01/04/2017 | Date last updated: 01/04/2017
 

Description

This article explains what to do if you experience a paper jam in the output slot or the rear tray of your PIXMA G1200.

 

Solution

If you experience a paper jam in the output slot or the rear tray, remove the jammed paper following the procedure below.
 

  1. Slowly pull out paper, either from paper output slot or from rear tray, whichever is easier.

    Hold the paper with both hands, and pull it out slowly so as not to tear it.



     

     Note

    • If you cannot pull out the paper, turn the printer back on. The paper may be ejected automatically.

    • If paper becomes jammed during printing and you need to turn off the printer to remove it, press the RESUME/CANCEL button to stop the printing before you turn off the printer.

  • If the paper tears and you cannot remove the jammed paper from the paper output slot or the rear tray, remove the paper from inside the printer.

Paper Is Jammed inside Printer
 

  1. Reload paper and press the printer's RESUME/CANCEL button.

    The printer resumes printing. Reprint the page you were printing if it was not printed properly due to the paper jam.

    If you turned off the printer in step 1, the print data that was sent to the printer is erased. Try printing again.


     Note

    • When reloading the paper, make sure you are using suitable paper and loading it correctly.

    • We recommend using paper sizes other than A5 to print documents with photos or graphics. A5 paper may curl and jam as it leaves the printer.


       


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments