The following video will guide you through loading the paper, or you can follow the written instructions below.



 

Written Instructions

Follow the instructions below to load paper in the rear tray of the PIXMA TS9020.

Prepare the paper

Flatten the paper if it's curled.

Load the paper

1. Open the rear tray cover (A) and then pull up the paper support (B).

   

2. Open the feed slot cover (C).

   

3. Slide the paper guides to open them, and load the paper in the center of the rear tray with the print side facing up. Load photo paper with the glossy side facing up.

4. Slide the paper guides (D) to align them with both sides of the paper stack, being careful not to push the paper guides too hard against the paper.

   
    Always load paper in the portrait orientation (E). Loading paper in the landscape orientation (F) can cause jams.

   

5. Be careful not to load sheets of paper higher than the load limit mark (G).

   

6. Slowly close the feed slot cover (H). 
    If the feed slot cover is open, the paper won't feed.

   

7. After closing the feed slot cover, the paper information screen displays. Select your loaded paper Page size and Type, then select Register.

   

 ​When printing starts, the operation panel opens, and the paper output tray pulls out automatically.
 

Notes about paper

• You can use general copy paper or Canon Red Label Superior WOP111/Canon Océ Office Colour Paper SAT213.

• We recommend Canon genuine photo paper for printing photos. For details, see supported media types.

• Specify the printer paper type when printing from Windows or when printing from a Mac^®.

• If you cut plain paper into small sizes such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) it can cause jams.

• ​Learn how to load envelopes in the rear tray​.