CameraWindow Does not Start (Windows 7)

Article ID: ART167204 | Date published: 01/17/2017 | Date last updated: 10/19/2017


CameraWindow Does not Start (Windows 7)


If CameraWindow does not start, uninstalling (deleting) and reinstalling the software is recommended.
(Uninstalling is the process of deleting unnecessary drivers or software in the event that a problem has occurred.)
  • Administrator rights are required in order to install or uninstall software.
  • Before beginning the procedure, be sure to back-up/move any image files that you have saved to the [CameraWindow] folder.
  • The screens displayed may differ depending on the model you use.

Uninstalling CameraWindow

1. Click [Start] () > [All Programs] > [Canon Utilities] >[CameraWindow] > [CameraWindow DC 8] > [CameraWindow DC 8 Uninstall].

2. If the [User Account Control] screen is displayed, click [Yes].

3. Click [OK].

4. The following screen appears, so click [OK].

This concludes the process of uninstalling [CameraWindow].

Reinstalling CameraWindow

Reinstall [CameraWindow] after the removal.
  • Make sure to restart your computer after deleting [CameraWindow]. If the computer is not restarted after uninstalling [CameraWindow], operation problems may occur when the software is reinstalled.

1. Confirm that all open programs have been closed.

2. Download the software from the Canon home page.
  • Make sure to download the files (software) which support your model.
  • Internet access is required, and any ISP account charges and access fees must be paid separately.
  • Operating security software may block the installing process.

3. Double-click the folder extracted from the contents of the downloaded file.

4. Double-click [CWxx_Installer.exe].

5. Select the area in which you live.

6. Select the country where you live, and then click [Next].

7. Select your language.

8. Following screen is displayed, so click [OK].

9. Click [Yes] to accept the License Agreement.

The [User Account Control] screen may be displayed depending on the computer model you use. In this case, please click [Yes].

10. The following screen appears, and installation begins.

11. When installation is over, click [Next].

12. The CANON iMAGE GATEWAY registration screen appears.
In this example, [No, I will register later] has been selected, and [Next] has been checked.

13. The following screen appears, so click [OK].

14. A [Finish] screen will be displayed, so click [Finish].

The [Restart] screen may be displayed depending on the computer model you use. In this case, please click [Restart].

This concludes the explanation for reinstalling [CameraWindow].



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments