Shooting Star Trails (Star Trails) (PowerShot G9 X Mark II)
| Article ID: ART167250 |
| |
Date published: 01/17/2017 |
| |
Date last updated: 01/17/2017 |
Description
Shooting Star Trails (Star Trails) (PowerShot G9 X Mark II)
Solution
| Solution |
Streaks created by the movement of stars through the sky are recorded in a single image. After determining the shutter speed and number of shots, the camera shoots continuously. A shooting session can last up to about two hours. Check the battery level in advance.
The procedure for shooting star trails is explained below.
1.Turn the camera on.
2.Enter [SCN] mode.
- Set the mode dial to [SCN].
3.Choose a shooting mode.
- Touch [
 ], and then touch [  ][  ] or drag up or down on the screen to choose a shooting mode.
NOTE
- If the default settings have not been changed, [ ] will be displayed.
4.Choose [  ].
- Follow steps 3 in "Specific Scenes" and choose [ ], and then press the [INFO.] button.
- Touch [
 ], and then press the [  ] button.
NOTE
- Zoom is set to maximum wide angle and cannot be adjusted.
5.Specify the duration of the shooting session.
- Turn the [
 ] ring to choose the shooting duration.
6.Secure the camera.
- Mount the camera on a tripod or take other measures to keep it still and prevent camera shake.
7.Shoot.
- Press the shutter button all the way down. [Busy] is displayed briefly, and then shooting begins.
- Do not disturb the camera while shooting.
- To cancel shooting, press the shutter button all the way down again. Note that cancellation may take up to about 30 seconds.
NOTE
- If the camera runs out of battery power, shooting stops and a composite image created from the images up to that point is saved.
- There will be a delay before you can shoot again, as the camera processes the images.
- ISO is set to Auto and cannot be changed.
- Aperture cannot be changed manually.
- Please use exposure compensation to change the brightness.
- The [Date/Time] you started shooting will be recorded in the image.
- For easier viewing, try choosing MENU > [
 -2 ] tab > [Night Display] > [On] before shooting.
- Try switching to manual focus mode to more accurately specify the focal position before shooting.
- Battery performance decreases at low temperatures. Try warming the battery pack a little by putting it in your pocket, for example, ensuring that the terminals do not touch any metal objects.
This concludes the explanation of the procedure for shooting star trails.
|
|
ID: 8203340100_EN_1
|
