Turning Off the Lamp (AF Assist Beam) When Shooting in Dimly Lit Locations (EOS M6)
| Article ID: ART167416 |
| |
Date published: 02/28/2017 |
| |
Date last updated: 09/11/2018 |
Description
Turning Off the Lamp (AF Assist Beam) When Shooting in Dimly Lit Locations (EOS M6)
Solution
| Solution |
Under low-light conditions, when you press the shutter button halfway, the AF-assist lamp may be illuminated. It illuminates the subject to enable easier autofocusing.
IMPORTANT
- Instructions in this section apply to the camera with [Shooting mode] set to [Program AE] (
 ).
NOTE
- In [
 ] mode, the AF Beam is set to [Disable] and cannot be changed.
The procedure for turning off the AF assist beam is explained below.
1. Set the camera's power switch to [ON].
2. Press the [MENU] button to display the menu screen.
3. Press the [  ], [  ] buttons or turn the [  ] dial to select the [  - 3 ] tab. Press the [  ], [  ] buttons or turn the [  ] dial to choose [AF-assist beam (LED) firing] and then press the [  ] button.
4. Press the [ ], [ ] buttons or turn the [ ] dial to choose [Disable], and then press the [ ] button.
This concludes the procedure for turning off the red lamp (AF assist beam) when shooting in dimly lit locations.
|
|
ID: 8203424900_EN_1
|
