The shutter is not released (EOS M6)
Article ID: ART167421 | | | Date published: 02/28/2017 | | | Date last updated: 09/11/2018 |
Description
The shutter is not released (EOS M6)
Solution
Solution |
When the shutter does not release, please refer to the sections below for possible solutions.
Securely mounting the lens The shutter may not be released if the lens is not securely mounted.
Please mount the lens securely, as shown in the image below.
Align the lens white mount index with the camera's white mount index. Turn the lens as shown by the arrow until it clicks in place.
![]()
Clean the lens and camera electrical contacts The shutter may not be released if the transfer of information between the camera and the lens is not carried out correctly.
The transfer of information between the camera and the lens is carried out by the electrical contacts on both the camera and the lens.
![]()
![]() ![]()
Make sure the Self-timer function is not set After you press the shutter button, if the picture is taken 10 sec. later or after you hear a beeping sound, it means the self-timer has been set.
The procedure for canceling the self-timer is explained below.
1. Set the cameraâs power switch to <ON>.
2. Press the <
![]() ![]() ![]() ![]() ![]()
3. Press the [
![]() ![]() ![]() ![]() ![]() ![]() ![]()
Confirm the Custom Functions setting If the [Release shutter without lens] option in the [Custom Function] menu is set to [Disable], the shutter will not be released if a lens is not attached.
To release the shutter when a lens is not attached, please set the [Release shutter without lens] option in the [Custom Function] menu is set to [Enable] using the following procedure.
1. Set the Mode switch to one of the modes shown in the example images below.
![]()
2. Press the <MENU> button to display the menu screen.
![]()
3. Press the [
![]() ![]() ![]() ![]() Press the [
![]() ![]() ![]() ![]() ![]()
4. Press the [
![]() ![]() ![]() ![]() ![]()
5. Press the [
![]() ![]() ![]() ã» At the bottom of the screen, the current Custom Function settings are indicated below the respective function numbers.
![]()
6. Press the <MENU> button. The screen shown below will reappear.
![]()
7. Press the <MENU> button again to return to the shooting screen.
Change or Format the Memory Card When the memory card becomes full, the following screen will be displayed and the shutter will not be released. Please use a different memory card, or initialize the card.
![]()
If you have checked all of the items listed above, but there is still no improvement, please contact the nearest Canon Service Center.
|
ID: 8203426600_EN_1
|
SIMS Doc Id
8203426600