Installing the Driver/Software Via a Network for macOS
Article ID: ART167658 | | | Date published: 04/05/2017 | | | Date last updated: 04/05/2017 |
Description
Installing the Driver/Software Via a Network for macOS
Solution
Solution |
This section describes instructions for installing the driver.
To use the printer, you need to install the driver, then add the printer you are using in [System Preferences].
Installing the Driver
1. Open the following folders: [CANON_MF_PRINTER] â [MF].
![]()
2. Double-click the [MF_Printer_Installer.pkg] or [Canon_Driver.pkg].
![]()
3. Click [Continue].
4. Read the software license agreement carefully â click [Continue].
![]()
5. Click [Agree].
![]()
6. Click [Install].
![]()
7. Enter the administrators name and password when the dialog box below appears â click [OK] or [Install Software].
![]() Installation starts.
8. Click [Close].
![]() Installation is complete.
Before using the driver, you must add the printer in [System Preferences] (see "Adding a Printer").
Adding a Printer This section describes instructions for adding a printer.
To use the printer, you need to install the driver, then add the printer you are using.
![]()
1. Open [System Preferences] â click [Print & Scan] or [Printers & Scanners].
![]()
2. Click [+].
![]() If there are shared printers or Bonjour supported devices on the network, click [+] and select [Add Other Printer or Scanner].
3. Select [IP] â select [Line Printer Daemon - LPD] from [Protocol].
![]() ![]()
4. Enter the IP address of the device you are going to use in [Address] â select [Select Printer Software]/[Select Software] from [Print Using]/[Use].
![]()
![]()
Enter a link-local unicast address, unicast address, or global unicast address in [Address].
![]()
5. Select the driver corresponding to the device you are going to use from the list â click [OK].
![]() ![]()
6. Click [Add].
![]()
7. Confirm that the device has been added â close the dialog box.
Confirm that the driver name selected in the step 5 is displayed beside [Kind].
![]()
If you are using OS X 10.10 or later, or if you add a MF8000 series, MF8000C series, MF8300 series, and/or MF8300C series device in an OS X 10.9 or earlier environment and update the macOS, perform the following procedure.
If you use version 10.2.0 or an earlier version of the printer driver in an OS X 10.9 or earlier environment and add a MF8000 series, MF8000C series, MF8300 series, and/or MF8300C series device, you will not be able to print if you perform a macOS update. In such cases, you need to delete the printer(s) and perform the above procedure after adding the printer(s) again with the latest driver.
After this, set the options of the device (see "Setting the Printer Options").
![]()
1. Open [System Preferences] â click [Print & Scan] or [Printers & Scanners].
![]()
2. Click [+].
![]() If there are shared printers or Bonjour supported devices on the network, click [+] and select [Add Other Printer or Scanner].
3. Click [Default].
![]()
4. Select the device you are going to use.
![]() ![]()
5. If the driver corresponding to the device you are using is not automatically selected in [Print Using]/[Use], select [Select Printer Software]/[Select Software] â select the driver corresponding to the device you are going to use from the list â click [OK].
![]() ![]()
6. Click [Add].
![]()
7. Confirm that the device has been added â close the dialog box.
Confirm that the driver name selected in the step 5 is displayed beside [Kind].
![]()
If you are using OS X 10.10 or later, or if you add a MF8000 series, MF8000C series, MF8300 series, and/or MF8300C series device in an OS X 10.9 or earlier environment and update the macOS, perform the following procedure.
If you use version 10.2.0 or an earlier version of the printer driver in an OS X 10.9 or earlier environment and add a MF8000 series, MF8000C series, MF8300 series, and/or MF8300C series device, you will not be able to print if you perform a macOS update. In such cases, you need to delete the printer(s) and perform the above procedure after adding the printer(s) again with the latest driver.
After this, set the options of the device (see "Setting the Printer Options").
Setting the Printer Options You need to set the printer options (such as paper feed options, paper output options, etc.) attached to the device.
If you are using the driver for the first time or want to change the options of the device, set the options so that you can use the functions of the device.
1. Open [System Preferences] â click [Print & Scan] or [Printers & Scanners].
![]()
2. Select the device you are using â click [Options & Supplies].
![]()
3. Click [Driver] or [Options].
![]()
4. Set the options â click [OK].
If you are using Mac OS X 10.7, check that the driver corresponding to the device you are using is selected for [Print Using].
![]()
![]()
|
Related Info |
Installing the Driver/Software Via USB for macOS
|
ID: 8203406500_EN_3
|
SIMS Doc Id
8203406500