| Issue |
You cannot send a fax. An error message appears on the display when you send faxes.
|
| Cause |
If you cannot send faxes, check the following.
|
| Summary |
|
| See Also | |
| Cause |
Did You Just Turn ON the Power Switch?
|
| Summary |
Wait for a while. After turning ON the power switch, the machine cannot scan documents immediately.
|
| See Also | |
| Cause |
Is the Machine Set for the Correct Telephone Line Type?
|
| Summary |
Make sure the machine is set for the correct telephone line type. If you do not know the telephone line type, contact your local telephone company.
For instructions on how to set the telephone line type, see Connecting the Telephone Line.
|
| See Also | |
| Cause |
Is Your Machine in the Fax Mode?
|
| Summary |
Select <Fax> to show the fax standby display.
|
| See Also | |
| Cause |
Is the Document Loaded Correctly?
|
| Summary |
Make sure the originals are correctly loaded. (See Placing Documents.)
|
| See Also | |
| Cause |
Is the Specified Destination Registered Correctly?
|
| Summary |
Check that the Address Book settings are registered correctly. (See Registering/Editing/Deleting Destinations in the Address Book.)
|
| See Also | |
| Cause |
Did You Dial the Correct Number?
|
| Summary |
Check that you have the correct number.
|
| See Also | |
| Cause |
Is the Machine in the Sleep Mode?
|
| Summary |
The machine does not scan originals if it is in the Sleep mode. To take the machine out of the Sleep mode, press on the operation panel.
|
| See Also | |
| Cause |
Is the Recipient's Machine Out of Paper?
|
| Summary |
Ask the recipient to make sure paper is loaded in the machine.
|
| See Also | |
| Cause |
Are there other Documents being Sent from Memory?
|
| Summary |
Allow time for the documents to finish sending.
|
| See Also | |
| Cause |
Has an Error Occurred During Transmission?
|
| Summary |
Check the display for an error message.Print a Fax TX Result Report and check for an error. (See Printing Reports and Lists.)
|
| See Also | |
| Cause |
Is the Telephone Cable Connected Properly?
|
| Summary |
Make sure the cable is connected properly. (See Connecting the Telephone Line.)
|
| See Also | |
| Cause |
Is the Telephone Line Working Properly?
|
| Summary |
Make sure there is a dial tone when you press <Hook> or when you lift the handset of any external telephone connected to the machine. If there is no dial tone, contact your local telephone company.
|
| See Also | |
| Cause |
Is the Recipient's Machine a G3 Fax Machine?
|
| Summary |
Make sure the recipient's machine is compatible with your machine.
|
| See Also | |
| Cause |
Is an Error Code #018 Shown on the TX Result Report?
|
| Summary |
The fax number you dialed is busy. Try sending the document later.
|
| See Also | |
| Cause |
Did the Recipient's Machine Answer within 35 Seconds (After All Automatic Redialing Attempts)?
|
| Summary |
Ask the recipient to check the fax machine. When sending the fax overseas, insert pauses in the fax number.
|
| See Also | |
| Cause |
Is the Data Indicator Blinking?
|
| Summary |
The external phone is busy. Please wait until the external phone becomes free.
|
| See Also | |
| Cause |
Is the Machine Overheated?
|
| Summary |
Unplug the machine and let it cool for about 5 minutes. Then plug in the machine and try sending again.
|
| See Also | |
| Cause |
Is a Fax Sent Using an Optical Fiber Line?
|
| Summary |
When using an optical fiber line or IP phone line, the machine may not work correctly depending on the connection environment or connected devices. In such a case, contact the provider of the optical fiber line or IP phone.
|
| See Also | |
|
ID: 8203460800_EN_1
|
