|
Basic Copy Operations
2. Press  (COPY/SCAN) to switch to the Copy mode screen.
3. Enter the number of copies using the numeric keys.
- Enter a quantity from 1 to 999.
- Press
 to cancel the entered quantity.
4. Specify the copy settings as necessary.
- Use
 /  to select the settings. For details, see the "User's Guide" from the Canon website (canon.com/oip-manual).
5. Press  .
- Copying starts.
- If you want to cancel copying, press
<Yes>
 . [ Canceling Copies ]
 When changing the settings in step 4
Depending on the copy settings you made, a screen for selecting the document size is displayed after you press  . Follow the procedure below.
5-B-1. Select the document size, and press .
5-B-2. Place the next document on the platen glass, and press .
- Repeat this step until you finish scanning the entire document.
5-B-3. Select <Start Copying>, and press .
- When the <Size/Settings Mismatch> message appears.
IMPORTANT
When copying documents with text or images that extend to the edges of the page
- The edges of the document might not be copied. For more information about the scan margins, see [ Paper Handling ].
REFERENCE
If you always want to make copies with the same settings, see the "User's Guide" from the Canon website (canon.com/oip-manual).
Selecting Document Type You can select the optical image quality for the copy depending on the document type, such as text-only documents, documents with charts and graphs, or magazine photos.
 <Text>
Suitable when copying documents that only contain text.
 <Text/Photo (High Speed)>
Suitable when copying documents that contain both text and photos. Priority is given to speed over image quality.
 <Text/Photo>
Suitable when copying documents that contain both text and photos.
 <Photo>
Suitable when copying documents that contain printed photos, such as magazines or pamphlets.
NOTE
If <Text/Photo (High Speed)>, <Text/Photo>, or <Photo> is selected and <Density> is set to <Auto Density>, it changes to Manual Density.
Canceling Copies If you want to cancel copying immediately after pressing , select <Cancel> and press , or press on the operation panel. You can also cancel copying after checking the copy status.
 Canceling in the Screen That is Displayed While Copying
Press to Cancel
Use  to Cancel
<Cancel>
Cancels copying.
Copy details
The number of copies, settings, and other details are displayed. If you only want to check the details without canceling copying, press to return to the copy main screen.
|
