WPA / WPA2 Details Screen (IJ Network Device Setup Utility)

Article ID: ART167807 | Date published: 05/08/2017 | Date last updated: 05/08/2017


This article contains information about the WPA / WPA2 details screen in the IJ Network Device Setup Utility.



Enter the password (passphrase) according to wireless router's encryption method if you change a wireless router to connect to the printer.

  1. Enter the passphrase when the WPA/WPA2 Details screen appears.

    Enter the passphrase set to the wireless router. The passphrase should be a string of 8 to 63 alphanumeric characters or a 64-digit hexadecimal value.

    If you do not know the wireless router passphrase, refer to the instruction manual provided with the wireless router or contact its manufacturer.

  2. Click Set.


    • If the printer cannot communicate with the computer after the encryption type of the printer was switched, make sure encryption types for the computer and the wireless router match that set to the printer.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments