Follow the instructions below to set up your connection to the wireless LAN using WPS.
Before you begin.
-
WPS (Wi-Fi® Protected Setup) is a method that allows you to easily connect network devices to a secure wireless network.
-
You do not need to know your SSID or password (network key) when to use this method.
-
If you have a wireless access point or router that supports WPS, you can easily connect your Canon wireless printer to your home network.
-
To check if your router supports WPS, confirm your router has the symbol as shown below. In some cases there will be a button labeled WPS. For more information, please see the access point or router’s instruction manual.
WPS connection set up.
-
While on the HOME screen, swipe left until you find LAN settings. Then tap LAN settings.
-
Tap Wireless LAN setup.
-
Tap WPS (Push button method).
-
Tap OK.
-
Press and hold the WPS button on the wireless router. Check the wireless router's manual for more information.
-
Tap OK on the printer within 2 minutes.
-
When the screen on the below appears, tap OK. The network connection setup is now complete.
- If you will use the MG7720 to print or scan wirelessly from a Mac or Windows computer, software must be installed to enable these functions.
If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options.
Or if you still need help, visit our Canon Community by clicking the button below to get answers:
____________________________________________________________________________________________
