Starting Easy Wireless connect on the TS5120

Article ID: ART168172 | Date published: 07/20/2017 | Date last updated: 04/08/2019


Preparations to connect to a Wireless LAN


Wireless Connection

Prior to starting setup on the Computer, Smartphone or tablet device, start the Easy wireless connect on the printer.  Then complete the setup on the computer or device. 
See the procedure below to start the Easy Wireless connect.

  1. Make sure that the printer is turned on.

    If the power is on, the POWER lamp (A) will be lit.

    figure: POWER lamp lights up

    (Appears in a new window)

    If the printer is performing cleaning, print head alignment, or other processes

    Wait for the process to finish, before starting setup.

  2. Press the HOME button (B) on the printer.

    If an error screen is displayed, press OK button, then press the HOME button.

    HOME screen
  3. Use the UpDownLeftRight buttons (C) to select Network status (D).

    HOME screen: Select Network status
  4. Press the OK button.
  5. Select LAN settings and press the OK button.

    Basic network information screen: Select LAN settings
  6. Select Wireless LAN and press the OK button.

    LAN settings screen: Select Wireless LAN
  7. Select Wireless LAN setup and press the OK button.

    Wireless LAN screen
    Wireless LAN screen: Select Wireless LAN setup
  8. Select Easy wireless connect and press the OK button.

  9. Select Yes and press the OK button.

    Easy wireless connect screen: Settings will be made on a computer or smartphone, etc.
  10. When the printer preparation is complete, the screen below appears.

    Return to the setup application screen and proceed with the setup.

    Easy wireless connect screen: Follow the instructions on the computer or smartphone, etc. to perform the operation.

TS5120 Page

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments