Wireless Setup for the imageCLASS MF400 Series, MF620 Series, MF720 Series and the MF515dw (Contains Video) (Windows)

Article ID: ART168398 | Date published: 08/23/2017 | Date last updated: 04/18/2023


This article provides instructions on how to setup your imageCLASS MF400 Series, MF620 Series, MF720 Series and the MF515dw printers to do wireless printing, scanning, and faxing depending on your specific model.  It is broken down into two parts.  Part 1 is a video that provides instructions on how to configure the settings on your printer.  Part 2 provides instructions on how to download and setup the software on your computer.

This article covers the specific units below. If your model is not listed please check the related articles section, or re-search the knowledgebase with your model name included. 

  • Color imageCLASS MF624Cw
  • Color imageCLASS MF628Cw
  • Color imageCLASS MF726Cdw
  • Color imageCLASS MF729Cdw
  • imageCLASS MF414dw
  • imageCLASS MF416dw
  • imageCLASS MF419dw
  • imageCLASS MF515dw


Part 1:  Setting Up The Printer

Please click on the following link to view a video explaining how to setup you printer for wireless printing.

Please note:  The banner at the end of this video contains an older link to our website. Please use 
https://www.usa.canon.com/support instead.


Part 2:  Downloading and Installing the Computer Software:

Once your printer has been setup follow the instructions below for downloading and installing your printer, scanner, and fax driver depending on which model you have.  In the example below we will be using the imageCLASS MF729Cdw and Windows 7 64 bit. The screens may vary somewhat based on your selections and the browser you use.

To download drivers and software for your device, please follow the instructions below:

1. Visit http://consumer.usa.canon.com/cusa

2. Type your model name into the search box and select it from the list that appears. 

3. Click the 'GO' button to get to the Drivers & Downloads page for your model.

4. From the Software & Drivers, Select your Operating System and Version from the provided drop-down menu.

5. The most common driver to use will be listed in the Recommended Section.  Click [SELECT] next to the driver you need and then click [DOWNLOAD].

6. Click [Run] to begin downloading and installing the driver software.

7.  Click [RUN] to install the software.

8.  Click [Next] on the Welcome to the Setup Wizard for the MF Drivers.

9.  Click [Yes] on the License Agreement.

10.  Select Network Connection (for Network Models.

11.  Click [Yes] to remove the firewall blocks set against this program.

12.  Select your Device from the Device List and click [Next].

13.  Select the Drivers to install and click [Next].

14.  Select the printer driver you want to install and click [Next].  The default is UFR II Printer Driver.

15.  Confirm the printer name and click [Next].

16.  Confirm the fax name and click [Next].

17.   Click [Start].

Congratulations, your drivers are installed and you should be able to print, fax, and scan wirelessly now depending on your model.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments