Introduction

IMPORTANT

• Before connecting to the camera, you must install the free dedicated　Camera Connect app on the smartphone.
• Please refer to "Related information" for details on the smartphones which can be connected with a camera wirelessly.
• Interface or functions of Camera Connect are subject to change, for application improvement or update. In such a case, features of Camera Connect may differ from sample screens or operation instructions in this explanation.

NOTE

• In the following explanation, smartphone setting procedures are indicated by the icon, and camera setting procedures are indicated by the icon.
• For convenience, smartphones, tablets, and other compatible devices are collectively referred to as "smartphones."
• Keep your fingers or other objects off the Wi-Fi antenna area. Covering this may decrease the speed of your image transfers.
• Depending on the condition of the network you are using, it may take a long time to send movies. Be sure to keep an eye on the camera battery level.
• When sending movies to smartphones, note that the supported image quality varies depending on the smartphone. For details, refer to the smartphone user manual.
• The setting procedures and items may differ depending on the smartphone model you use and its OS. For more information, refer to your smartphone's instruction manual.
• On the screen, wireless signal strength is indicated by the following icons: [ ] high, [ ] medium, [ ] low, [ ] weak.
• Connections require that a memory card be in the camera.

Step 1-A: Connect via Bluetooth

1-A-1. Install Camera Connect.

1-A-2. Register a nickname.

Press the / buttons to choose [Wireless settings], and then press the button.

Press the / buttons to choose [Nickname], and then press the button.

Press the button.

1-A-3. Prepare for pairing.

1-A-4. Start Camera Connect.

1-A-5. Select the camera to connect to.

1-A-6. Complete pairing.

IMPORTANT

• Battery life may be shorter when you use the camera after pairing, because power is consumed even when power saving is active.
• Before bringing the camera to places where the use of electronic devices is restricted, set [Bluetooth] to [Off], to avoid having the camera ready for Bluetooth communication even when it is off.

Go to "Step 2-A: Controlling the Camera via Bluetooth".

Step 1-B: Connect via NFC

NOTE

Operation when devices are initially connected via NFC varies depending on the camera mode when the devices are touched together.

• If the camera is in Shooting mode when the devices are touched together, you can choose and send images on the image selection screen. Once the devices are connected, you can use your smartphone for remote live view shooting or geotagging your shots. It’s easy to reconnect to recent devices, which are listed in the Wi-Fi menu.
• If the camera is in Playback mode when the devices are touched together, you can choose and send images from the index display shown for image selection.

IMPORTANT

When using NFC, keep the following points in mind.

• If your Camera Connect version is 2.7.10 or later, check the Android OS version of your smartphone. If the version is 10.0 or later, the camera firmware must be up to date to take advantage of NFC functionality. You can download the latest firmware from the Canon website.
• Avoid strong impact between the camera and smartphone. This may damage the devices.
• Depending on the smartphone, the devices may not recognize each other immediately. In this case, try holding the devices together in slightly different positions. If connection is not established, keep the devices together until the camera screen is updated.
• Do not place other objects between the camera and smartphone. Also, note that camera or smartphone covers or similar accessories may block communication.

1-B-1. Install Camera Connect.

1-B-2. Establish the connection.

Touch the (N-Mark) on the smartphone with Camera Connect installed against the camera’s N-Mark.

NOTE

If the [Device Nickname] screen is displayed, press the / buttons to choose [OK], and then press the button.

1-B-3. Adjust the privacy setting.

NOTE

• You can also change the camera nickname on the screen in step 1-B-2.
• To disable NFC connections, choose MENU > [ 4] tab > [Wireless settings] > [Wi-Fi Settings] > [NFC] > [Off].

Go to "Step 2-B: Controlling the Camera via Wi-Fi".

Step 1-C: Connect via the Wi-Fi Menu

1-C-1. Install Camera Connect.

1-C-2. Access the Wi-Fi menu.

NOTE

If the [Device Nickname] screen is displayed, press the / buttons to choose [OK], and then press the button.

1-C-3. Choose [ ].

NOTE

• Once you have connected to devices via the Wi-Fi menu, recent destinations will be listed first when you access the menu. You can easily connect again by pressing the / buttons to choose the device name and then pressing the button. To add a new device, display the device selection screen by pressing the / buttons, and then configure the setting.
• If you prefer not to display recent target devices, choose MENU > [ 4] tab > [Wireless settings] > [Wi-Fi Settings] > [Target History] > [Off].

1-C-4. Choose [Add a Device].

NOTE

• To connect without entering a password in step 1-C-5, choose MENU > [ 4] tab > [Wireless settings] > [Wi-Fi Settings] > [Password] > [Off]. [Password] is no longer displayed on the SSID screen (in step 1-C-4).

1-C-5. Connect the smartphone to the network.

1-C-6. Start Camera Connect.

1-C-7. Choose the camera to connect to.

1-C-8. Adjust the privacy setting.

IMPORTANT

• For remote live view shooting, choose [All images] in step 1-C-8.
• All images in the camera can be viewed from the connected smartphone when you choose [All images] in step 1-C-8. To restrict camera images that can be viewed from the smartphone, choose a different option in step 1-C-8. Privacy settings for registered smartphones can be changed later, as needed.

NOTE

You can also change the camera nickname on the screen in step 1-C-2.

Go to "Step 2-B: Controlling the Camera via Wi-Fi".

Step 2-A: Controlling the Camera via Bluetooth

2-A-1. In Camera Connect on the smartphone, choose [Bluetooth remote controller].

2-A-2. Press to shoot.

NOTE

• [Bluetooth remote controller] is not available when connected via Wi-Fi.
• Bluetooth connection status is indicated by one of the following icons.

- [ ] Connected, [ ] Disconnected

• To disable Bluetooth communication, choose MENU > [ 4] tab > [Wireless settings] > [Bluetooth settings] and set [Bluetooth] to [Off].
• To check the information of the smartphone connected via Bluetooth in [Check/clear connection info], choose MENU > [ 4] tab > [Wireless settings] > [Bluetooth settings]. Choose [Address check] to check the camera’s Bluetooth address.

Step 2-B: Controlling the Camera via Wi-Fi

CAUTION

Privacy settings must be configured in advance to allow viewing of all images from the smartphone.

2-B-1. In Camera Connect on the smartphone, choose [Remote live view shooting].

2-B-2. Press to shoot.

NOTE

• Movie shooting is not available.
• Focusing may take longer.
• Image display or shutter release may be delayed, depending on the connection status.
• Any rough subject motion shown on the smartphone due to the connection environment will not affect recorded images.
• Captured images are not transferred to the smartphone. Use the smartphone to browse and transfer images from the camera.

Using the On-Screen Keyboard

Entering Characters	Touch the characters to enter them.
Moving the Cursor	Touch .
Entering Line Breaks*	Touch .
Switching Input Modes	To switch to numbers or symbols, touch . Touch to enter capital letters. ●　Available input modes vary depending on the function you are using.
Deleting Characters	Touch to delete the previous character.
Confirming Input and Returning to the Previous Screen	Press the button.
*For some functions, is not displayed and cannot be used.