Connecting Your Printer to a Wireless LAN - WPS Push Button Setup: PRO-10 / PRO-100

Article ID: ART168656 | Date published: 10/17/2017 | Date last updated: 10/09/2019


This article explains how to connect your PRO-10 / PRO-100 printer to a wireless network using the WPS Push Button Setup method.



To connect your printer to a wireless network via the WPS Push Button Method, please follow the steps below.
  1. Press and hold the Wi-Fi button (A) on the printer when you are ready to press the button on the wireless router.

    Be sure to hold the Wi-Fi button for at least 2 seconds.

  2. Make sure that the (blue) Wi-Fi lamp flashes quickly and the POWER lamp is lit as shown in the illustration above, then press and hold the button on the wireless router within 2 minutes.

    If your router has a WPS push button on it, it may have any of these symbols:

    Consult your router's documentation for more information.

  3. Make sure that the (blue) Wi-Fi lamp and POWER lamp are lit.

The printer is now connected to the wireless network.

For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account


PIXMA Pro Series Printers Support

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments