Set up the TR8520 for use on a wired (ethernet) connection

Article ID: ART168971 | Date published: 11/10/2017 | Date last updated: 03/04/2019


Network Connection Setup


Wired Connection

Follow the procedure below to set up a printer.

Before Starting Wired Connection Setup

  1. Make sure the printer is turned on.

    If the power is on, the ON lamp (A) will be lit.

    figure: ON lamp lights up

    (Appears in a new window)

If printer is performing cleaning, print head alignment, or other processes

Wait for the process to finish, before starting setup.

  1. You will need an Ethernet cable (sold separately).

    figure: Ethernet cable
  2. Remove the Cap (B) from the port located on the left side at the back of the printer.

    figure: Remove the cap
  3. Connect the printer and a network device (router, etc.) with an Ethernet cable (C).

    Do not connect to any other port.

    figure: Connecting Ethernet cable
  4. If HOME is displayed on the left side of the screen, tap HOME.

    HOME screen
  5. Tap Network status (D).

    HOME screen: Select Network status
  6. Tap LAN settings.

    Basic network information screen: Select LAN settings
  7. Tap Wired LAN.

    LAN settings screen: Select Wired LAN
  8. Tap Wired LAN active/inactive.

    Wired LAN screen: Select Wired LAN active/inactive
  9. Tap Active.

    Wired LAN screen: Select Active
  10. Tap HOME on the left side of the screen.

    When connection is complete, Network status appears at the bottom left of the screen.

    HOME screen

The network connection setup is now complete.

TR8520 Page

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments