Set Up Fax Functions - PIXMA MX922

Article ID: ART169014 | Date published: 11/14/2017 | Date last updated: 02/19/2020


Learn how to connect and configure your PIXMA MX922 to use the fax machine functions.


Follow these steps to quickly set up your PIXMA printer's fax functions.

Start the setup

  1. Make sure the printer is turned ON.

  2. Press MENU.

  3. Select Setup, and press OK.

  4. Select Device settings, and press OK.

  5. Select Fax settings, and press OK.

  6. Select Start easy setup or Easy setup, and press OK or Start setup.

  7. Follow the on-screen instructions to complete the settings.

Connect the wires

  1. Connect the printer / fax to a telephone jack with the supplied cable.
    Note European users must use a six-wire telephone cable.

    Figure shows printer connected to telephone jack
  2. When you connect a telephone or an answering machine, remove the cap (1), then connect a telephone or an answering machine with a telephone cable (2).

    Telephone cable

Note Telephone line duplexers are not supported. United Kingdom users may need a BT adapter.

Good to know

Refer to these articles for instructions for how to:

Enter sender information

Set the date and time

Enter user information - unit fax number, and the unit name

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments