Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.
Note
- If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the FINE cartridge whose ink is low.
You need to prepare: a sheet of A4 or Letter-sized plain paper
-
Make sure that the power is turned on.
-
Load a sheet of A4 or Letter-sized plain paper in the rear tray.
-
Pull out the paper output tray and the output tray extension.
-
Press and hold the RESUME button and release it when the Alarm lamp flashes 1 time.
The nozzle check pattern will be printed.
Do not perform any other operations until the printer completes the printing of the nozzle check pattern.
-
Examine the nozzle check pattern.
Examine the nozzle check pattern, and clean the print head if necessary.
-
Check if there are missing lines in the pattern (A) or horizontal white streaks in the pattern (B).
If there are missing lines in the pattern (A):
- (C) Good
- (D) Bad (lines are missing)
If there are horizontal white streaks in the pattern (B):
- (E) Good
- (F) Bad (horizontal white streaks are present)
If any color in the pattern (A) or the pattern (B) is not printed:
(Example: Magenta pattern is not printed)
If one of the above is applied, cleaning the print head is required.