TS302 Easy Wireless Connect Instructions

Article ID: ART169174 | Date published: 12/08/2017 | Date last updated: 12/19/2017


Prepare a connection on the printer.


Easy wireless connect

Follow the procedure below to set up a printer.


  • If a device is connected to the Internet via a wireless router, and you then connect it to a printer in Wireless Direct mode, the existing connection between the device and wireless router will be disabled. In that case, the connection of the device may switch to a mobile data connection automatically depending on your device. When you connect to the Internet using a mobile data connection, charges may apply depending on your contract.
  1. If the Wireless lamp (A) on the printer is flashing, press the ON/Stop button (B).

    figure: The Wireless lamp flashes; press the ON/Stop button
  2. Press and hold the Direct button (C) on the printer until the Direct lamp (D) flashes.

    figure: Press and hold the Direct button and the Direct lamp flashes
  3. Make sure the Wireless lamp flashes.

    figure: The Wireless lamp flashes
  4. Return to the application screen and proceed with the setup.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments