Ask a Question

Cleaning the Print Head - TS202

Article ID: ART169187 | Date published: 12/08/2017 | Date last updated: 12/19/2017
 

Description

If Printing is Faint or Uneven

Solution

Cleaning the Print Head

Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition.Cleaning the print head consumes ink, so clean the print head only when necessary.

  1. Make sure that the power is turned on.

  2. Press and hold RESUME button and release it when Alarm lamp flashes 2 times.

    The printer starts cleaning the print head.

    The cleaning will be complete when the ON lamp lights after flashing.

    Do not perform any other operations until the printer completes the cleaning of the print head.This takes about 30 seconds.

  3. Check the print head condition.

    To check the print head condition, print the nozzle check pattern.

Note


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments