Ask a Question

Deep Print Head Cleaning - TS202

Article ID: ART169188 | Date published: 12/08/2017 | Date last updated: 05/06/2019
 

Description

If print quality does not improve by the standard print head cleaning 

Solution

Deep Print Head Cleaning

If print quality does not improve by the standard cleaning of the print head, clean the print headdeeply. Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when necessary.

  1. Make sure that the power is turned on.

  2. Press and hold RESUME button and release it when Alarm lamp flashes 3 times.

    The printer starts cleaning the print head deeply.

    The cleaning will be complete when the ON lamp lights after flashing.

    Do not perform any other operations until the printer completes the deep cleaning of the print head. This takes about 1 minute.

  3. Check the print head condition.

    To check the print head condition, print the nozzle check pattern.

If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours.

If the problem is still not resolved, replace the FINE cartridge with a new one.

If the problem is still not resolved after replacing the FINE cartridge, service is required
For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments