Before Starting

The steps listed below are specific to the G4210.  For instructions for other models, click here
 

Steps to Print the Network Details

Use the operation panel to print the printer's current network settings.

 The network settings printout contains important information about your network. Handle it with care.

1. Make sure that the printer is powered on.

2. Load two sheets of A4 or Letter-sized plain paper.

3. Press the Setup  button.
   The Setup menu screen appears.

4. Select Device settings and press the OK button.

5. Select LAN settings and press the OK button.

6. Select Print LAN details and press the OK button.
   The printer starts printing the network setting information.
   The following information on the printer's network setting is printed out. (Some setting values are not displayed depending on the printer settings.)

   Item Number	Item	Description	Setting
   1	Product Information	Product information	–
   1-1	Product Name	Product name	XXXXXXXX
   1-2	ROM Version	ROM version	XXXXXXXX
   1-3	Serial Number	Serial number	XXXXXXXX
   2	Network Diagnostics	Network diagnostics	―
   2-1	Diagnostic Result	Diagnostic result	XXXXXXXX
   2-2	Result Codes	Result codes	XXXXXXXX
   2-3	Result Code Details	Result code details	http://canon.com/ijnwt
   3	Wireless LAN	Wireless LAN	Enable/Disable
   3-2	Infrastructure	Infrastructure	Enable/Disable
   3-2-1	Signal Strength	Signal strength	0 to 100 [%]
   3-2-2	Link Quality	Link quality	0 to 100 [%]
   3-2-3	Frequency	Frequency	XX (GHz)
   3-2-4	MAC Address	MAC address	XX:XX:XX:XX:XX:XX
   3-2-5	Connection	Connection status	Active/Inactive
   3-2-6	SSID	SSID	Wireless LAN SSID
   3-2-7	Channel	Channel	XX (1 to 13)
   3-2-8	Encryption	Encryption method	None/WEP/TKIP/AES
   3-2-9	WEP Key Length	WEP key length (bits)	Inactive/128/64
   3-2-10	Authentication	Authentication method	None/auto/open/shared/WPA-PSK/WPA2-PSK
   3-2-11	TCP/IPv4	TCP/IPv4	Enable
   3-2-12	IP Address	IP address	XXX.XXX.XXX.XXX
   3-2-13	Subnet Mask	Subnet mask	XXX.XXX.XXX.XXX
   3-2-14	Default Gateway	Default gateway	XXX.XXX.XXX.XXX
   3-2-15	TCP/IPv6	TCP/IPv6	Enable/Disable
   3-2-16	Link Local Address	Link local address	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   3-2-17	Link Local Prefix Length	Link local prefix length	XXX
   3-2-18	Stateless Address1	Stateless address 1	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   3-2-19	Stateless Prefix Length1	Stateless prefix length 1	XXX
   3-2-20	Stateless Address2	Stateless address 2	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   3-2-21	Stateless Prefix Length2	Stateless prefix length 2	XXX
   3-2-22	Stateless Address3	Stateless address 3	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   3-2-23	Stateless Prefix Length3	Stateless prefix length 3	XXX
   3-2-24	Stateless Address4	Stateless address 4	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   3-2-25	Stateless Prefix Length4	Stateless prefix length 4	XXX
   3-2-26	Default Gateway1	Default gateway 1	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   3-2-27	Default Gateway2	Default gateway 2	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   3-2-28	Default Gateway3	Default gateway 3	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   3-2-29	Default Gateway4	Default gateway 4	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   3-2-33	IPsec	IPsec setting	Active
   3-2-34	Security Protocol	Security method	ESP/ESP & AH/AH
   3-3	Wireless Direct	Operation mode for Wireless Direct	Enable/Disable
   3-3-1	MAC Address	MAC address	XX:XX:XX:XX:XX:XX
   3-3-2	Connection	Connection status	Active/Inactive
   3-3-3	SSID	SSID	Wireless Direct SSID
   3-3-4	Password	Password	Wireless Direct password (10 alphanumeric characters)
   3-3-5	Channel	Channel	3
   3-3-6	Encryption	Encryption method	AES
   3-3-7	Authentication	Authentication method	WPA2-PSK
   3-3-8	TCP/IPv4	TCP/IPv4	Enable
   3-3-9	IP Address	IP address	XXX.XXX.XXX.XXX
   3-3-10	Subnet Mask	Subnet mask	XXX.XXX.XXX.XXX
   3-3-11	Default Gateway	Default gateway	XXX.XXX.XXX.XXX
   3-3-12	TCP/IPv6	TCP/IPv6	Enable/Disable
   3-3-13	Link Local Address	Link local address	XXXX:XXXX:XXXX:XXXX XXXX:XXXX:XXXX:XXXX
   3-3-14	Link Local Prefix Length	Link local prefix length	XXX
   3-3-15	IPsec	IPsec setting	Active
   3-3-16	Security Protocol	Security method	–
   5	Other Settings	Other settings	–
   5-1	Printer Name	Printer name	Printer name (Up to 15 alphanumeric characters)
   5-2	Wireless Direct DevName	Device name for wireless direct	Device name for wireless direct (Up to 32 alphanumeric characters)
   5-4	WSD Printing	WSD printing setting	Enable/Disable
   5-5	WSD Timeout	Timeout	1/5/10/15/20 [min]
   5-6	LPD Printing	LPD printing setting	Enable/Disable
   5-7	RAW Printing	RAW printing setting	Enable/Disable
   5-9	Bonjour	Bonjour setting	Enable/Disable
   5-10	Bonjour Service Name	Bonjour service name	Bonjour service name (Up to 52 alphanumeric characters)
   5-11	LLMNR	LLMNR setting	Enable/Disable
   5-12	SNMP	SNMP setting	Enable/Disable
   5-14	DNS Server	Obtain DNS server address automatically	Auto/Manual
   5-15	Primary Server	Primary server address	XXX.XXX.XXX.XXX
   5-16	Secondary Server	Secondary server address	XXX.XXX.XXX.XXX
   5-17	Proxy Server	Proxy server setting	Enable/Disable
   5-18	Proxy Address	Proxy address	XXXXXXXXXXXXXXXXXXXX
   5-19	Proxy Port	Proxy port specification	1 to 65535
   5-20	Cert. Fingerprt(SHA-1)	Certificate fingerprint(SHA-1)	XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
   5-21	Cert. Fingerprt(SHA-256)	Certificate fingerprint(SHA-256)	XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX

   ("XX" represents alphanumeric characters.)

PIXMA G4210 Page