Cleaning the Paper Feed Rollers from a Windows PC - iP110

Article ID: ART170008 | Date published: 04/13/2018 | Date last updated: 04/13/2018


If paper will not feed into your PIXMA iP110, or if paper feeds crooked, performing a roller cleaning may resolve the problem.



If paper either does not feed into your PIXMA iP110 or if the paper feeds in crooked, performing a roller cleaning may help resolve this issue.

Follow the steps below to clean the paper feed rollers from a Windows PC:

Roller Cleaning

  1. Remove all sheets of paper from the rear tray, and set the paper thickness lever to the right.

  2. Open the printer driver setup window.

  3. Click Roller Cleaning on the Maintenance tab
    The confirmation message appears.

  4. Make sure that the printer is on and then click OK.
    Paper feed roller cleaning starts.

  5. After the rollers have stopped, follow the instructions in the message, load three sheets of plain paper into the rear tray, and click OK.
    Paper will be ejected and feed roller cleaning will be completed.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments