Default Network Settings - MB5120
Article ID: ART170019 | Date published: 04/17/2018 | Date last updated: 04/25/2019
 

Description

LAN Connection Defaults / Direct Connection Defaults

Solution

 

Default Network Settings

LAN Connection Defaults

Item

Default

Change LAN

Disable LAN

SSID

BJNPSETUP

Communication mode

Infrastructure

Wireless LAN security

Disable

IP address (IPv4)

Auto setup

IP address (IPv6)

Auto setup

Set printer name*

XXXXXXXXXXXX

Enable/disable IPv6

Enable

Enable/disable WSD

Enable

Timeout setting

1 minute

Enable/disable Bonjour

Enable

Service name

Canon MB5100 series

LPR protocol setting

Enable

Wired LAN DRX setting

Enable

RAW protocol

Enable

LLMNR

Active

("XX" represents alphanumeric characters.)

* Default value depends on printer. To check value, use operation panel.

Direct Connection Defaults

Item

Default

SSID (Identifier for direct connection)

DIRECT-abXX-MB5100series *1

Password

YYYYYYYYYY *2

Wireless LAN security

WPA2-PSK (AES)

Direct connection device name

ZZZZZZ-MB5100series *3

Connection request confirmation

Displayed

*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is specified when the printer is turned on for the first time.)

*2 The password is specified automatically when the printer is turned on for the first time.

*3 "ZZZZZZ" represents last six digits of printer's MAC address.


MB5120 Page