How can I do a test print with the RP-10?

Article ID: ART170109 | Date published: 04/25/2018 | Date last updated: 04/25/2018


If you are unsure if the printer is working properly and wish to test the functionality of the RP-10 (hardware test), you can perform a test print.


Follow these steps to perform a test print of the RP-10:
  1. Press and hold the Power Button to turn OFF the printer (if the printer is currently powered ON).
  2. Press the Power Button while pressing the Feed Button to turn ON the power.
    The test print starts. The test print is performed repeatedly until you stop it.
  3. Press the Feed Button to stop the test print.

    The test print stops if a printer error (such as "Paper End" or "Paper Cover Open" etc.) occurs. Once the error is cleared, the test print resumes.

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments