Hazard Distance
• During projection, looking into the lens from distances closer than this poses a risk of vision impairment or other serious injury.
• When a
projection lens with a hazard distance indicated on it is used with the projector, the operator shall either install the product at a height that will prevent eye exposure within the hazard distance or control access to ensure that persons do not approach within the hazard distance.
 

Warning
	•  The projector is designated as a Class 1 laser product according to IEC/EN 60825-1:2014. •  The equipment is designated as a Class 3R laser product according to IEC/EN 60825-1:2007. •  Complies with FDA performance standards for laser products except for deviations pursuant to  Laser Notice No. 50, dated June 24, 2007. •  Laser parameters Wavelength: 450 nm – 460 nm Maximum power: 144 W Beam divergence: 2°
	•  The projector incorporates a laser module. Disassembly or modification is dangerous and must not be attempted. •  Operate and adjust the projector only as described in this manual. Incorrect operation or  adjustment poses a risk ofexposure to potentially hazardous laser light.
	•  Do not use when damaged. Even if the projector is used as described in this manual, failure to discontinue use when it i damaged (as indicated by screen abnormalities) may result in fire, electric shock, or eye injury from laser light. •  For assistance when disposing of the projector, contact the Canon Customer Support Center. Do not disassemble the projector yourself when disposing of it. •  Do not attempt to install or remove the lens unit yourself. Be sure to request this service from  a qualified technician or contact the Canon Customer Support Center.